FrogE-TECH

Films

ASTM

ISO

Blocking Load

ASTM D3354

--

Dart Drop Impact

ASTM D1709

ISO 7765-1

Elmendorf Tear Strength

ASTM D1922

ISO 6383-2

Elongation at Break

ASTM D882

ISO 527-1, -3

Elongation at Yield

ASTM D882

--

Film Toughness

ASTM D882

--

Flexural Modulus

ASTM D790

ISO 178

Instrumented Dart Impact

ASTM D3763

ISO 7765-2

Oxygen Permeability

ASTM D3985

--

Seal Strength

ASTM F88

--

Secant Modulus

ASTM D882

ISO 527-1, -3

Tensile Strength at Break

ASTM D882

ISO 527-1, -3

Tensile Strength at Yield

ASTM D882

ISO 527-1, -3

Total Energy Impact

ASTM D4272

--

Trouser Tear Resistance

--

ISO 6383-1

Water Vapor Transmission

ASTM E96

--

Water Vapor Transmission Rate

ASTM F1249

--

Aging

ASTM

ISO

Change in Durometer (Shore) Hardness

ASTM D471

ISO 1817

Change in Durometer (Shore) Hardness in Air

ASTM D573

ISO 188

Change in IRHD Hardness in Air

ASTM D573

ISO 188

Change in Tensile Strength

ASTM D471

ISO 1817

Change in Tensile Strength in Air

ASTM D573

ISO 188

Change in Ultimate Elongation

ASTM D471

ISO 1817

Change in Ultimate Elongation in Air

ASTM D573

ISO 188

Change in Volume

ASTM D471

ISO 1817

Change in Volume in Air

ASTM D573

ISO 188

Elastomers

ASTM

ISO

Clash-Berg Modulus

ASTM D1043

--

Compression Set

ASTM D395

ISO 815

Elongation at Break

ASTM D412

ISO 37

Elongation at Yield

ASTM D412

ISO 37

Elongation Set After Break

ASTM D412

ISO 37

Tear Strength

ASTM D624

ISO 34-1

Tear Strength, Split

ASTM D412

ISO 37

Tensile Set

ASTM D412

ISO 37

Tensile Strength at Break

ASTM D412

ISO 37

Tensile Strength at Yield

ASTM D412

ISO 37

Tensile Stress at 100%

ASTM D412

ISO 37

Tensile Stress at 200%

ASTM D412

ISO 37

Tensile Stress at 300%

ASTM D412

ISO 37

Tensile Stress at 50%

ASTM D412

ISO 37

Fill Analysis

ASTM

ISO

Apparent Viscosity

ASTM D3835

--

Melt Specific Heat

ASTM C351

--

Melt Thermal Conductivity

ASTM C177

--

Melt Viscosity

ASTM D3835

--

Hardness Hardness Conversion Chart

ASTM

ISO

Ball Indentation Hardness

--

ISO 2039-1

Barcol Hardness

ASTM D2583

--

Durometer (Shore) Hardness

ASTM D2240

ISO 868

IRHD Hardness

ASTM D1415

ISO 48

Rockwell Hardness

ASTM D785

ISO 2039-2

Impact

ASTM

ISO

Charpy Notched Impact Strength

ASTM D256

ISO 180

Charpy Unnotched Impact Strength

--

ISO 179

Drop Impact Resistance

ASTM D4226

--

Gardner Impact

ASTM D3029

--

Instrumented Dart Impact

ASTM D3763

ISO 7765-2

Multi-Axial Instrumented Impact Energy

--

ISO 6603-2

Multi-Axial Instrumented Impact Peak Force

--

ISO 6603-2

Notched Izod Impact Strength

ASTM D256

ISO 180

Reverse Notch Izod Impact Strength

ASTM D256

ISO 180

Tensile Impact Strength

ASTM D1822

ISO 8256

Unnotched Izod Impact Strength

ASTM D256

ISO 180

Optical

ASTM

ISO

Clarity

ASTM D1746

--

Gardner Gloss

ASTM D523

--

Gloss

ASTM D2457

--

Haze

ASTM D1003

--

Refractive Index

ASTM D542

ISO 489

Transmittance

ASTM D1003

--

Yellowness

ASTM D1925

--

Physical

ASTM

ISO

Apparent Density

ASTM D1895

ISO 60

Bulk Factor

ASTM D1895

--

Density -Specific Gravity

ASTM D1505, ASTM D792 & ASTM D4883

ISO 1183

Environmental Stress Cracking Resistance (ESCR)

ASTM D1693

--

Melt Mass-Flow Rate (MFR)

ASTM D1238

ISO 1133

Melt Volume-Flow Rate (MVR)

ASTM D1238

ISO 1133

Molding Shrinkage

ASTM D955

ISO 294-4

PVC Cell Classification

ASTM D1784 & ASTM D4216

--

Vacuum Water Absorption

ASTM D1056

Viscosity Number

--

ISO 307

Water Absorption at 24 hrs

ASTM D570

ISO 62

Water Absorption at Equillibrium

ASTM D570

ISO 62

Water Absorption at Saturation

ASTM D570

ISO 62

Thermal

ASTM

ISO

Accelerated Oven Ageing

--

ISO 4577

Brittleness Temperature

ASTM D746

ISO 812 & ISO 974

Coefficient of Linear Thermal Expansion (CLTE)

ASTM D696, ASTM E831,ASTM E228

ISO 11359-1, -2

DTUL (Deflection Temperature Under Load) at 1160 psi (8.0 MPa)

--

ISO 75

DTUL at 264 psi (1.80 MPa)

ASTM D648

ISO 75

DTUL at 66 psi (0.45 MPa)

ASTM D648

ISO 75

Ductile/Brittle Transition Temperature

--

ISO 6603-2

Glass Transition Temperature

ASTM E1356

--

Melting Temperature (DSC)

--

ISO 3146

Peak Crystallization Temperature (DSC)

ASTM D3418

ISO 3146
& ISO 11357-1, -3

Specific Heat

ASTM C351

--

Thermal Conductivity

ASTM C177

ISO 8302

Vicat Softening Temperature

ASTM D1525

ISO 306