Propriétés électriques et mécaniques

Mardi 20 janvier 2009 2 20 /01 /Jan /2009 13:52

Flammability	ASTM	ISO	Other
Flame Rating	--	--	UL 94
Glow Wire Flammability Index	--	IEC 60695-2, -12
Glow Wire Ignition Temperature	--	IEC 60695-2, -13
Limiting Oxygen Index	ASTM D2863	ISO 4589-1, -2	--

Electrical	ASTM	ISO
Arc Resistance	ASTM D495	--
Comparative Tracking Index (CTI)	--	IEC 60112
Dielectric Constant	ASTM D150	IEC 60250
Dielectric Strength	ASTM D149	IEC 60243-1
Dissipation Factor	ASTM D150	IEC 60250
Needle Flame Test	--	IEC 60695-2-10
Surface Resistivity	ASTM D257	IEC 60093
Volume Resistivity	ASTM D257	IEC 60093

Mechanical	ASTM	ISO
Apparent Bending Modulus	ASTM D747	--
Coefficient of Friction	ASTM D1894	--
Compressive Modulus	ASTM D695	ISO 604
Compressive Strength	ASTM D695	ISO 604
Deformation Under Load	ASTM D621	--
Fatigue Limit	ASTM D671	--
Flexural Creep	ASTM D2990	--
Flexural Creep Modulus	--	ISO 6602
Flexural Modulus	ASTM D790	ISO 178
Flexural Strength	ASTM D790	ISO 178
Flexural Strength at Break	ASTM D790	--
Flexural Strength at Yield	ASTM D790	--
Nominal Tensile Strain at Break	--	ISO 527-1, -2
Poisson's Ratio	ASTM E132	--
Shear Modulus	ASTM D732	ISO 537
Shear Strength	ASTM D732	--
Taber Abrasion Resistance	ASTM D1044	--
Tensile Creep Modulus	--	ISO 527-1, -2
Tensile Elongation at Break	ASTM D638 & D1708	ISO 527-1, -2
Tensile Elongation at Yield	ASTM D638 & D1708	ISO 527-1, -2
Tensile Modulus	ASTM D638	ISO 527-1, -2
Tensile Strength	ASTM D638 & D1708	--
Tensile Strength at Break	ASTM D638 & D1708	ISO 527-1, -2
Tensile Strength at Yield	ASTM D638 & D1708	ISO 527-1, -2
Tensile Strength, Ultimate	ASTM D638	ISO 527-1, -2

Thermoset	ASTM	ISO
Thermoset Mix Viscosity	ASTM D2393	--

UL 746	UL
Comparative Tracking Index (CTI)	UL 746
High Amp Arc Ignition (HAI)	UL 746
High Voltage Arc Resistance to Ignition (HVAR)	UL 746
High Voltage Arc Tracking Rate (HVTR)	UL 746
Hot-wire Ignition (HWI)	UL 746
Outdoor Suitability	UL 746C
Relative Temperature Index (RTI) Electric	UL 746
Relative Temperature Index (RTI) Mechanical with Impact	UL 746
Relative Temperature Index (RTI) Mechanical without Impact	UL 746

Par FrogeTech - Publié dans : PLASTURGIE
Ecrire un commentaire - Voir les 0 commentaires

FrogE-TECH